SMS: Stainless Metric Stock - The UK's leading distributer of metric stainless steel

The UK’s leading distributor of metric stainless steel

Image representing Data Sheets

Data Sheets

Stainless Steel   |   General Information

Specifications for Stainless Tubular Products


A list of the main specifications covering stainless steel tube, pipe, fittings and flanges.


List of Specifications

Specification Covers
ANSI B36.19 Dimensions for Stainless Steel Pipes
(ANSI B36.10) Dimensions for Carbon Steel Pipes
ASTM A312 Seamless & Welded Pipe
ASTM A358 Welded Pipe
ASTM A182 Chemical Compositon for Forgings (Flanges)
BS4504 / EN1092 Dimensions & Pressure Ratings for 'PN' Flanges
BS10 Dimensions & Pressure ratings for 'Plate' or 'Table' Flanges
ASTM A403 Dimensions for Butt Weld Fittings
MSS SP43 Dimensions for Stub Ends
BS1740 Dimensions for 150lb BSP Fittings
BS21 Whitworth/British Standard Pipe Thread
ANSI B16.11 / BS3799 Dimensions and Pressure Ratings for HP Fittings
ANSI B1.20.1 NPT (API) Thread
EN20286 / BS4582 Dimensions & Pressure Ratings for Hygienics
ASTM A270 Dimensions for Hygienic Tube (swg Wall Thicknesses)
DIN 11850 Dimensions for Hygienic Tube (Metric Wall Thicknesses)
ASTM A268 Seamless & Welded Tube - Ferritic/Martensitic
ASTM A269 Seamless & Welded Tube - Austenitic
ASTM A249 Welded Heat Exchanger Tube
ASTM A213 Seamless Heat Exchnager Tube
ASTM A240 Plates (For Manufacture of Pipe/etc)
ASTM A450 General Requirements for Tube
ASTM A530 General Requirements for Pipe


Download PDF


Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.